home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Network Support Library
/
RoseWare - Network Support Library.iso
/
nwlite
/
faxdoc.exe
/
2556.TXT
< prev
next >
Wrap
Text File
|
1993-05-11
|
3KB
|
87 lines
FYI
(Note: The origin of this information may be internal or external to Novell.
Novell makes every effort within its means to verify this information.
However, the information provided in this document is FOR YOUR INFORMATION
only. Novell makes no explicit or implied claims to the validity of this
information.)
TITLE: ACCPAC
DOCUMENT ID#: FYI.P.6053
DATE: 03DEC92
PRODUCT: NetWare Lite
PRODUCT VERSION: All versions
SUPERSEDES: NA
LITE FAX DOC #: 2556
SYMPTOM
NA
ISSUE/PROBLEM
Installing ACCPAC
General Information
1. Follow the installation instructions for NetWare Lite v1.0
carefully. Download Fax document 2501 or FYI.P.6050 for help with
installing and setting up a network.
2. The installation procedures will create a \NWLITE directory on your
C:\ drive. You need to edit a file called STARTNET.BAT that is
located in this directory.
3. Look for the line in STARTNET.BAT that loads the program called
SHARE. If you are using MSDOS, change that line to the following:
C:\DOS\SHARE /L:250 /F:10000
If you are using DR DOS, change the line to the following, instead:
C:\DRDOS\SHARE /L:250
4. The "FILES=" parameter in your CONFIG.SYS should be set as follows
on both the workstations and the server:
FILES=250
5. Obtain the patches that Novell has released for NetWare Lite v1.0.
Please acquire Fax Document 2903 or see FYI.P.6087 for more
information.
Installing Windowing System Manager and LANPak (Much of the following
information was obtained from Computer Associates Limited. A similar
document is found on their fax system.)
1. Insert WSM DISK 1 in drive A: and type A:INSTALL from the root
directory to which you are installing. Answer "yes" to indicate
that you are installing on a network. You will be prompted for
additional disks.
2. Upon completion of the WSM install, you will be taken to the
"Install Programs" portion of WSM, at which point you should insert
the LANPak disk and continue.
3. When the system prompts you if you are installing on Novell NetWare,
answer NO.
This is not Novell NetWare. NetWare Lite is a peer-to-peer network
that means that it is DOS-based--quite different from NetWare 2.x
and 3.x.
4. Choose "PC-Lan," or if you wish, choose "other," and type NETWARE
LITE. The preceding is the most critical step. If you have already
installed the LANPak as Novell, you are probably suffering a great
deal of "Unable to obtain access to...." messages. Just reinstall
the LANPak as above.
5. Continue with the application installation.
SOLUTION
NA